DISCLAIMER:  I take no responsibility if you damage your own engine by following this guide. Good luck!


Calibrating the throttle

To calibrate KAD44 / KAD300.

Found on the FB group Volvo Penta Norway

Press and hold N while turning on the ignition. Wait 6 seconds before releasing N. The neutral light will then flash to indicate neutral. Shift into forward gear, press N for three seconds to confirm. Tachometer shows 2.1 Full throttle forward + N to confirm. In gear bank over and confirm with N for three seconds. Full backwards and confirm with N three sec. Then neutral and confirm with N for three seconds and then N again to confirm exit.

Congrats - calibrated OK